Peran Utama Sertifikasi Enjiner Instrumentasi

Pemeliharaan dan Perbaikan:

Setelah sistem kontrol diimplementasikan, enjiner instrumentasi bertanggung jawab untuk melakukan pemeliharaan rutin dan perbaikan jika terjadi kerusakan. Mereka harus memastikan bahwa semua perangkat keras dan perangkat lunak berfungsi dengan baik untuk mencegah terjadinya gangguan dalam proses produksi.

Optimisasi Proses:

Enjiner instrumentasi juga memiliki peran dalam mengoptimalkan proses produksi untuk meningkatkan efisiensi dan kualitas produk.

Peran Vital Enjiner Instrumentasi dalam Industri Modern

KLIK DISINI

Keterampilan yang Diperlukan

Untuk menjadi enjiner instrumentasi yang sukses, seseorang harus memiliki kombinasi keterampilan teknis dan pemahaman yang mendalam tentang proses industri. Beberapa keterampilan yang penting termasuk:

• Pemahaman tentang prinsip-prinsip fisika dan teknik
• Pengetahuan mendalam tentang sensor, aktuator, dan perangkat pengukuran
• Kemampuan pemrograman untuk mengembangkan perangkat lunak kontrol
• Keterampilan dalam analisis data dan pemecahan masalah

Tantangan dalam Bidang Enjiner Instrumentasi

Ketepatan Pengukuran:

Konsistensi dan ketepatan dalam pengukuran merupakan tantangan utama bagi enjiner instrumentasi. Setiap ketidakakuratan kecil dalam pengukuran bisa memiliki dampak yang besar pada proses produksi dan kualitas produk akhir.

Keamanan dan Keandalan Sistem:

Kegagalan sistem kontrol dapat menyebabkan bencana besar yang berpotensi merusak lingkungan dan menyebabkan kerugian finansial yang besar. Enjiner instrumentasi harus memastikan bahwa sistem yang mereka rancang memenuhi standar keamanan yang ketat dan dapat beroperasi secara andal dalam jangka waktu yang lama.

Pemahaman Teknologi Baru:

Dengan cepatnya perkembangan teknologi, enjiner instrumentasi harus terus memperbarui pengetahuan mereka tentang teknologi baru dalam bidang sensor, kontrol, dan komunikasi. Hal ini memerlukan komitmen untuk belajar secara berkelanjutan.

Peran enjiner instrumentasi dalam industri modern sangatlah vital. Dengan pemahaman yang mendalam tentang sistem kontrol dan pengukuran, enjiner instrumentasi membantu mengubah visi industri menjadi kenyataan.

The post Sertifikasi Enjiner Instrumentasi appeared first on .

JTCC menyelenggarakan Pelatihan Ahli K3 Listrik. Tersedianya Ahli K3 Listrik di Industri diharapkan mampu mengawasi pelaksanaan peraturan perundangan K3 di industri dan mampu memberikan peran optimal dalam organisasi perusahaan dalam mengendalikan resiko kecelakaan kerja.

Tujuan Pelatihan Ahli K3 Listrik

Pelatihan ini didesain untuk mempersiapkan dan menghasilkan tenaga Ahli K3 Listrik yang dapat melakukan identifikasi, evaluasi, dan pengendalian resiko dalam pelaksanaan K3 Listrik.

1. Mempersiapkan tenaga pelaksana yang mampu melaksanakan K3 Listrik di tempat kerja
2.  menghasilkan tenaga pelaksana yang mampu menjelaskan teknik pencegahan dan penanggulangan kecelakaan kerja, khususnya yang terkait dengan pekerjaan listrik.
3. Mempersiapkan tenaga ahli yang dapat mengelola dan menjalankan organisasi P2K3.

 Kompetensi Pelatihan

1. UMUM

Peserta dapat melakukan pekerjaan pemasangan, pengoperasian dan pemeliharaan instalasi listrik secara benar dan aman bagi dirinya, orang lain, peralatan dan aman dalam pengoperasiannya.

2. AKADEMIK

Peserta dapat memahami secara baik tentang :

• Potensi Bahaya Listrik
• Cara Pencegahan Bahaya Listrik
• Prosedur Kerja Selamat
• Pembacaan Gambar
• Pemeriksaan dan Pengujian Instalasi Listrik
• Dasar-dasar Teknik Kelistrikan
• Peraturan dan Standar Kelistrikan

3. KETRAMPILAN TEKNIK

• Melaksanakan Pekerjaan Pemasangan Instalasi Listrik
• Melaksanakan Pekerjaan Perawatan Instalasi Listrik
• Mempergunakan Alat Ukur Listrik
• Mengoperasikan Instalasi Listrik
• Mengidentifikasi dan Mendeteksi Bahaya Listrik
• Melakukan Tindakan Pertolongan Pertama Kecelakaan Listrik

Materi

1. Kebijakan Keselamatan dan Keselamatan Kerja
2. UU No. 1 tahun 1970
3. Sistem Manajemen Kesehatan dan Keselamatan Kerja
4. Perundangan K3 Listrik
5. Pengukuran listrik
6. Pembangkitan Listrik
7. Transmisi & Distribusi Tenaga Listrik
8. K3 Bangunan
9. Instalasi Listrik
10. Instalasi penyalur petir
11. Bahaya Bahaya Kelistrikan
12. Alat pengaman Listrik
13. Pengujian Listrik
14. APD pekerjaan listrik
15. Rencana dan Prosedur Tanggap Darurat
16. Pertolongan Pertama Kecelakaan Listrik
17. Laporan Analisis Kecelakaan
18. Evaluasi

Peserta

Pelatihan ini ditujukan bagi para pegawai yang telah memiliki pengalaman kerja sekurang-kurangnya 2 (dua) tahun sebagai teknisi listrik.

Persyaratan Peserta :

1. Min D3
2. FC Ijazah
3. Foto Copy Kartu Identitas
4. Membawa Surat Rekomendasi dari Perusahaan
5. Membawa Pas Foto 2×3 dan 4×6, masing-masing 3 lembar (background merah)

Model

• Presentation
• Discuss
• Case Study
• Post Test
• Evaluation

Waktu dan Tempat

Durasi     : 18 Hari

Waktu        : 08.00 – 16.00 WIB

Lokasi      : Gedung JTCC, Jl. Patangpuluhan No. 26 Yogyakarta

In House Training: Depend on request

Biaya & Fasilitas :  

Rp 14.500.000,- /participant 

• Module / Handout
• Sertifikat
• Training Kit
• Soft Copy Materi
• SK Penunjukan Ahli K3 Listrik
• Coffe Break & Lunch
• Souvenir

Instruktu

Instruktur pelatihan ini akan disampaikan oleh tenaga ahli K3 dari Disnakertrans RI dan Tenaga Ahli dari kalangan industri yang telah berpengalaman dalam memberikan pelatihan-pelatihan K3.

 INFORMASI & PENDAFTARAN

Noviana

Tlp/ WA : 0812 2680 9527

Email : novi@jtcc-consultant.com

The post Pelatihan Ahli K3 Listrik appeared first on .

PLC WORKSHOP is also designed to help delegates keep abreast of the latest  PLC technologies and techniques available in this area, this tutorial offers an excellent opportunity for delegates to ask specific questions and exchange ideas relating to their own applications.

TRAINING COURSE OBJECTIVES

The course is for technicians and engineers, who have little or no PLC programming and application experience, who are required to make changes to existing. Programming theory is kept to a minimum; the course is hands on with great emphasis on the practical aspects of Programmable Logic Controller applications.  After completing this course, participants will be able to:

• Understand and be able to follow more complex program code
• Be able to use more powerful program monitor and display tools
• Be able to use enhanced diagnostic tools to quickly identify and resolve abnormal system operation

COURSE CONTENTS

• Introduction

This section will begin with a discussion of basic theory of operation and how it is used to control a process. It will also identify potential applications and relate how PLC control compares with traditional methods of control. A discussion of the benefits of  PLC control will follow.

• Hardware Configuration

This section will describe the various components used in the formulation of a PLC control system. Included will be methods to select the correct features and capabilities to match the process requirements.

1. CPU sizes and types
2. Backplanes
3. Power supplies
4. I/O module types

• Installation and Wiring Considerations

There are necessary steps that must be taken to ensure that the control system will be correctly installed to provide safe and reliable operation. Installation recommendations and techniques will be given for the following:

• Power and grounding
• Enclosures
• Input devices and wiring methods
• Output devices and wiring methods

Programming

Various types of programming software will be introduced to the delegates. Techniques for simple program development and downloading will be demonstrated. Topics will include:

• Introduction to Programmable Logic Controllers (System Configuration and Sizing)
• Ladder Programming Concept and Restrictions
• Introduction to Ladder Type Function Block Programming
• Software Tag Based addressing
• Controller Tags
• Program Tags
• Base Tags
• Alias Tags
• Data Types
• Tags Scope
• Tasks
• Main Routine
• Sub Routine
• System I/O Configuration
• Communicating with the PLC
• Downloading and Uploading PLC programs
• Monitoring PLC programs
• PLC Programming (Inputs/outputs Timers Counters, stc)
• Application Functions
• Commenting of programs
• Monitoring techniques
• Fault finding and searching
• Testing and forcing techniques

INSTRUKTUR DAN VENUE

Miftakhul Hudha, S.T, M.Eng

Expert in automation system and PLC

REGULER TRAINING

Tanggal          : 21 – 23 November 2018

Waktu             : (08.00 – 16.00 WIB)

Lokasi             : Yogyakarta

WHO SHOULD ATTEND

• PLC Engineering and design personnel
• Maintenance and technical services personnel
• Process and operations personnel
• Technical and process managers
• Engineering and design personnel
• Electrical consulting engineers
• Electrical contractors

FASILITAS

1. Module / Handout
2. Sertifikat
3. Training Kit
4. Soft Copy Materi
5. Coffee Break & Lunch
6. Souvenir
7. Penjemputan kedatangan di bandara
8. Transportasi local selama pelatihan

INFORMASI & PENDAFTARAN

Noviana

WA / Phone  :  0812-2680-9527

office : (0274) 419936

Email   : novi@jtcc-consultant.com

Head Office : Jl. Patangpuluhan No 26 Wirobrajan Jogyakarta

The post Intermediate Programmable Logic Controller (Plc) Using Siemens appeared first on .

Tujuan Training Electrical Power System Analysis

Setelah mengikuti pelatihan peserta akan dapat :

1. Meningkatkan pengetahuan dan wawasan mengenai pemanfaatan ETAP untuk aplikasi di bidang Electrical Power
2. Meningkatkan Analisa Aliran Daya menggunakan ETAP
3. Analisa Motor dan Transformator menggunakan ETAP.
4. Analisa Hubung Singkat menggunakan ETAP
5. Melakukan Analisa Motor Starting menggunakan ETAP
6. Melakukan Analisa Koordinasi Proteksi
7. Transient menggunakan ETAP
8. Studi Harmonisa dan menentukan ukuran Filter  

Materi Training Electrical Power System Analysis

1. Building One-Line Diagram Using ETAP
2. Load Flow Study Using ETAP
3. Short-Circuit Analysis Using ETAP
4. Motor Acceleration Analysis Using ETAP
5. Protection Device Coordination Analysis Using ETAP
6. Transient Stability Anaysis Using ETAP
7. Harmonic Analysis Using ETAP
   

Instruktur Training Electrical Power System Analysis

Miftakhul Huda., ST,MT

Waktu dan Tempat Training Electrical Power System Analysis

• Durasi Training 3 hari: 07 – 09 Agustus 2018
  
• Waktu: 08.00 – 16.00 WIB
• Lokasi Swiss Belhotel Yogyakarta
• In House Training: depend on request

Peserta Training Electrical Power System Analysis

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan  pengetahuan dalam melakukan analisa sistem tenaga.

Fasilitas Training Electrical Power System Analysis

1. Modul dan Soft Copy materi
2. Sertifikasi tanda keikutsertaan dari JTCC
3. Training Kit : Booknote, Pulpen, Tas Training
4. Souvenir
5. Transportasi Antar Jemput Selama Pelatihan   

Biaya Training Electrical Power System Analysis

• Rp 6.500.000/peserta
  *(tidak termasuk pajak)
  *(belum termasuk penginapan)

Pembayaran dapat dilakukan pada saat pelatihan atau melalui rekening:

PT Bank Mandiri Cab KH A Dahlan Yogyakarta
Acc. No. 137-000-786993-2
a/n Jogja Training & Career Center

INFORMASI & PENDAFTARAN

Noviana

WA / Phone  :  0812-2680-9527

Office : (0274) 419 936

Email    : novi@jtcc-consultant.com

Website :  http://www.jtcc-consultant.com

Head Office : Jl. Patangpuluhan No 26 Wirobrajan Yogyakarta

Catatan untuk diperhatikan :

• Kami menghimbau kepada calon peserta training untuk tidak Reservasi Hotel atau Tiket Perjalanan sebelum kepastian training kami informasikan (untuk mengantisipasi reschedule atau cancelation training).
• Kepastian Running training dan yang terkait dengan waktu dan tempat penyelenggaraan akan kami informasikan minimal 1 minggu sebelum agenda training. Jika disaat kepastian training telah kami informasikan dan calon peserta tidak dapat mengikuti, kami mohon untuk dikirimkan letter of cancelation (surat pembatalan) resmi dari perusahaan.
• Kami selaku penyelenggara tidak menanggung segala bentuk klaim ganti rugi dari calon peserta training (contoh :  Reservasi Hotel dan Tiket Pesawat) diluar yang terkait dengan fasilitas training yang kami berikan.

The post Training Electrical Power System Analysis appeared first on .

ELECTRICAL POWER SYSTEM ANALYSIS

 Description & Objectives

  Description

A Power System is predominantly in steady state operation or in a state that could with sufficient accuracy be regarded as steady state. In a power system there are always small load changes, switching actions, and other transients occurring so that in a strict mathematical sense most of the variables are varying with the time. However, these variations are most of the time so small that an algebraic, i.e. not time varying model of the power system is justified.

The purpose of this course is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion, and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem

Objectives

• Verifying the adequacy of the power distribution system and it’s components.
• Recognize coordination related disturbances and outages.
• Collect the required data to perform a detailed coordination study.
• Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

   Course Content

1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

v  Effects of Short Circuits

v  Fault Current Sources

v  Machine Reactances

v  Fault Current Characteristics

1. Electrical Equipment Ratings

v Fuses

v Circuit Breakers

v Motor Starters

v Conductors and Bus

1. Balanced Fault Calculations
2. Coordination Fundamentals

v Procedures

v Data Collection

v Scaling Factors

1. Plotting Time/Current Curves

v Circuit Breakers

v Fuses

v Time Delay/Instantaneous Relays

v Relay Coordination Intervals

1. Equipment Protection and Coordination

v NEC and ANSI/IEEE Criteria

v  Conductors (Low and Medium Voltage)

v  Transformers

v  Motors e. Conductors (Low and Medium)

  Instructor Tugino, ST, MT(expert in Electrical Power System Analysis and Instrumentation)

  Who Should Attend This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems. Method Presentation, Discussion, Simulation, Case Study, and Evaluation Time & Venue Training will be held on :

• 11 – 13 September 2012
• 25 – 27 September 2012
• 16 – 18 Oktober 2012
• 29 – 31 Oktober 2012
• 12 – 14 November 2012
• 27 – 29 November 2012
• 11 – 13 Desember 2012
• 19 – 21 Desember 2012

Venue:

• Grand aston Hotel, Yogyakarta ( Rp. 8.500.000/ participant non residential, special price Rp. 8.000.000/participant for minimum 3 participants from the same company.
• Pullman Hotel, Bali. ( Rp. 11.500.000/ participant non residential, special price Rp. 11.000.000/participant for minimum 3 participants from the same company.
• Aston Hotel, Balikpapan ( Rp. 9.500.000/ participant non residential, special price Rp. 9.000.000/participant for minimum 3 participants from the same company.
• Lor – In Hotel, Solo ( Rp. 7.500.000/ participant non residential, special price Rp. 7.000.000/participant for minimum 3 participants from the same company.
• Sentosa Resort, Lombok ( Rp.11.500.000/ participant non residential, special price Rp. 11.000.000/participant for minimum 3 participants from the same company.

   Course Fee

   Facilities:

• Convinience meeting room
• Free drop and pick-up services to and from the airport
• Transportation during training
• Training Kit
• 2x Coffee break & Lunch
• Certificate
• Souvenir
• City Tour + water sport ( Special for Bali & Lombok )

Registration should be made 5 days prior to the implementation of training.

Number of attendees must be in accordance with the number of participants registered. If the number of attendees does not match with the number of participants registered, then the company must pay the training cost as much as the number of participants that are registered in the enrollment form that has been sent to us.

Payment can be made at the time of registration or via bank transfer to acc:

PT Bank Mandiri Cabang KH Ahmad Dahlan Yogyakarta

Acc. No.  137-00-0786993-2

a/n JOGJA TRAINING & CAREER CENTER

   JOGJA TRAINING & CAREER CENTER (JTCC)

JOGJA TRAINING & CAREER CENTER (JTCC)

Jl. Cendana No. 5 ,Baciro, Yogyakarta

Phone       :  (0274) 419936

Fax            :  (0274) 419936

E-mail      :  info@jtcc-consultant.com

Website   :  http://www.jtcc-consultant.com

Copyright © 2012 JTCC

Allright Reserved

The post Electrical Power System Analysis appeared first on .

Electrical Power Distributed Control System

 Description & Objectives

  Distributed Control Systems (DCS) made its first entry in the 70’s. Cheap microprocessors made the possibility to distribute control systems across the entire plant. Each controller control a limited part of the plant and each controller communicate to each other using a proprietary communication protocol. This is of course making the system becomes more configurable. DCS uses pre-programmed modules which are available to execute simple and more complex process control tasks. During the years that followed, DCS systems were used throughout the most diverse process industries in both continuous and batch applications. DCS applications in these different control environments made them increasingly mature, hundreds of configurable modules for every possible control problem were developed and stored in the system library. Using DCS, process controllers were able to handle tens, hundreds even thousand of control loops without jeopardizing the reliability of the complete control systems.

Objectives

• Understand the concept of DCS
• Explain the components, architectures, operation of DCS and hardware in DCS
• Apply concepts body/mind reaction to audio and visuals symbols to meaningful human machine interfaces
• Evaluate and justify potential benefits of DCS to improve productivity
• ·      Examine evolution of process control to face changing needs

   Course Content

• Understanding of Distributed Computing
• Comparison of Current System Philosophies
• Controller Structure
• Sequential and Batch Control
• Operator Interface
• Alarms and Trending
• Communication Networks and Field-bus
• Control Strategy and Configuration
• System Security
• Implementation for Industrial Control

   Instructor

Agfianto Eko Putra, ST, M.Si

  Who Should Attend Operator, Technician, Maintenance, Engineers dealt with industrial process control and automation. METODH Presentation, Discussion, Simulation, Case Study, and Evaluation Time & Venue Training will be held on :

• 11 – 14 September 2012
• 16 – 19 Oktober 2012
• 12 – 15 November 2012
• 27 – 30 November 2012
• 11 – 14 Desember 2012

:

Venue

• Grand Aston Hotel, Yogyakarta ( Rp. 8.500.000/ participant non residential, special price Rp. 8.000.000/participant for minimum 3 participants from the same company.
• Kuta Paradiso Hotel, Bali. ( Rp. 11.500.000/ participant non residential, special price Rp. 11.000.000/participant for minimum 3 participants from the same company.
• Aston Hotel, Balikpapan ( Rp. 9.500.000/ participant non residential, special price Rp. 9.000.000/participant for minimum 3 participants from the same company.
• Novotel Hotel, Solo ( Rp. 8.500.000/ participant non residential, special price Rp. 8.500.000/participant for minimum 3 participants from the same company.
• Sheraton Senggigi Hotel, Lombok ( Rp.11.500.000/ participant non residential, special price Rp. 11.000.000/participant for minimum 3 participants from the same company.

   Course Fee

   Facilities:

• Convinience meeting room
• Free drop and pick-up services to and from the airport
• Transportation during training
• Training Kit
• 2x Coffee break & Lunch
• Certificate
• Souvenir
• City Tour + water sport ( Special for Bali & Lombok )

JOGJA TRAINING & CAREER CENTER (JTCC)

Jl. Cendana No. 5 ,Baciro, Yogyakarta

Phone       :  (0274) 419936

Fax            :  (0274) 419936

E-mail      :  info@jtcc-consultant.com

Website   :  http://www.jtcc-consultant.com

Copyright © 2012 JTCC

Allright Reserved

The post Electrical Power Distributed Control System appeared first on .

DESKRIPSI & TUJUAN	This course is designed for engineers who need to design and configure a ControlLogix system. The objective of this course is to provide sufficient knowledge and experience to be able to develop, configure and program a ControlLogix system. The configuration portion of the course covers online communication with a ControlLogix system, data organisation of the Logix5550 processor and data exchange over multi-protocol networks. Configuration of the DH+/RIO gateway, ControlNet gateway and Ethernet gateway modules will be covered in lecture and lab exercises. Participants will have the opportunity to use the tools RSLogix5000, ControlLogix Gateway and RS Networks for ControlNet software.   To provide delegates with a detailed view of an Allen Bradley ControlLogix Control System, its design, major components, programming methods and operation.
MATERI	1.  Introduction to ControlLogix 2.    Overview of RSLogix5000 3.    ControlLogix Architecture4.    ControlLogix Memory 5.    Project Organization 6.    Data File Types 7.    ControlLogix Bit 8.    Instructions 9.    Timer Instructions 10.    Counter Instructions 11.    Data Collecting 12.    File/ Data Manipulations 13.    Shift Registers/ Sequencers 14.    Program Control Instructions 15.    Documenting Programs 16.    Communications 17.    Lab Work & Case Studies
PEMATERI	Ir. Edwin Ardiansyah, Operational Director PT. MEET, Jakarta, Integrator System ALLEN BRADLEY PLC, expert in operation of CONTROL LOGIX 5000/RSLOGIX5000
PESERTA	Senior Technician, Maintenance, Engineers dealt with industrial control and automation, especially working with PLC
METODE	Presentation, Discussion, Simulation, Case Study, Evaluation
WAKTU & TEMPAT	This training will be held on March 14th – 16th 2011 Shantika Hotel , Yogyakarta
Course Fee	Training Fee: Rp. 7.000.000,- / peserta ( non residensial )Special Rate: Rp.6.500.000,-/peserta (non residensial) untuk pengiriman minimal 3 orang peserta dari perusahaan yang sama. Fasilitas: Training kit Hard and soft copy course material Souvenir Certificate 2x coffee break and lunch Convenience meeting room   Registration should be made 5 days prior to the implementation of training. Number of attendees must be in accordance with the number of participants registered. If the number of attendees does not match with the number of participants registered, then the company must pay the training cost as much as the number of participants  that are registered in the official enrollment / registration form that has been sent to us.   Payment can be made at the time of registration or via bank account:   PT Bank Mandiri Cabang KH Ahmad Dahlan Yogyakarta Acc. No.  137-00-0786993-2 a/n CV JOGJA TRAINING & CAREER CENTER
JOGJA TRAINING & CAREER CENTER (JTCC)Jl. Cendana No.5 YogyakartaPhone:  0274-419936                                                   Fax:  0274-419936Email  :upie.supriatin@jtcc-consultant.com pie_buana@yahoo.com                                   Website:  http://www.jtcc-consultant.com Contact Person:  Upie                                                 Mobile:  0858 8027 8869  PIN BB 2778BF37
Copyright © 2012 JTCC Allright Reserved

The post Programmable Logic Controller Using Allen Bradley Control Logix 5000/Rslogix5000 appeared first on .

Klik to apply untuk mendaftar dan download lampiran artikel lengkap

The post Electrical Power Distributed Control System appeared first on .

ELECTRICAL POWER SYSTEM ANALYSIS

 Description & Objectives  DescriptionA Power System is predominantly in steady state operation or in a state that could with sufficient accuracy be regarded as steady state. In a power system there are always small load changes, switching actions, and other transients occurring so that in a strict mathematical sense most of the variables are varying with the time. However, these variations are most of the time so small that an algebraic, i.e. not time varying model of the power system is justified.

The purpose of this course is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion, and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem

Objectives

• Verifying the adequacy of the power distribution system and it’s components.
• Recognize coordination related disturbances and outages.
• Collect the required data to perform a detailed coordination study.
• Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

   Course Content 

1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

v  Effects of Short Circuits

v  Fault Current Sources

v  Machine Reactances

v  Fault Current Characteristics

1. Electrical Equipment Ratings

v Fuses

v Circuit Breakers

v Motor Starters

v Conductors and Bus

1. Balanced Fault Calculations
2. Coordination Fundamentals

v Procedures

v Data Collection

v Scaling Factors

1. Plotting Time/Current Curves

v Circuit Breakers

v Fuses

v Time Delay/Instantaneous Relays

v Relay Coordination Intervals

1. Equipment Protection and Coordination

v NEC and ANSI/IEEE Criteria

v  Conductors (Low and Medium Voltage)

v  Transformers

v  Motors e. Conductors (Low and Medium)

  Instructor Tugino, ST, MT(expert in Electrical Power System Analysis and Instrumentation)  Who Should Attend This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems. Method Presentation, Discussion, Simulation, Case Study, and Evaluation Time & Venue Training will be held on :

• March 27th – 30th 2012

At Grand Aston Hotel, Yogyakarta (**** )  Course Fee 

  IDR 8.500.000,- / participant (non residential)

Special rate IDR 8.000.000,- / participant (non residential) for minimum 3 participants from the same company.

Facilities:

• Convinience meeting room at Grand Aston Hotel, Yogyakarta ( *****)
• Free drop and pick-up services to and from the airport
• Transportation during training
• Training Kit
• 2x Coffee break & Lunch
• Certificate
• Souvenir

Registration should be made 5 days prior to the implementation of training.

Number of attendees must be in accordance with the number of participants registered. If the number of attendees does not match with the number of participants registered, then the company must pay the training cost as much as the number of participants that are registered in the enrollment form that has been sent to us.

Payment can be made at the time of registration or via bank transfer to acc:

PT Bank Mandiri Cabang KH Ahmad Dahlan Yogyakarta

Acc. No.  137-00-0786993-2

a/n JOGJA TRAINING & CAREER CENTER

   JOGJA TRAINING & CAREER CENTER (JTCC)Jl. Cendana No 5, Baciro, Yogyakarta

Phone:  0274 – 419936                                          Fax:  0274 – 419936

Email: sari_jtcc@yahoo.com

sari.sartika@jtcc-consultant.com             Website:  http://www.jtcc-consultant.com

Contact Person:  Sari                                             Mobile:  0819 3839 7518

The post Electrical Power System Analysis appeared first on .

Materi

Basic Concept of AC & DC.
Instalasi dan trouble shooting
Perawatan
Intro To Load Estimating
Load Estimating : Cooling and Heating
Load Estimating : System Design
Mechanical Refrigeration : Cycle Descrip.
Mechanical Refrigeration Cycle Analysis
Ducting Design : Principle & Method
Fundamental of Psychrometric
Psychrometric : Properties of Air ADV.PROG.
Refrigerant Piping System
Water Piping & Pump Selection
Multi Room Buildings,Load CH.SYS.PROG.
Ducting Design : Air Side
Ducting Design : Centrifugal Fan
Ducting Design : Room Air Distribution
Cooling Coil Performance
Air Handling Unit : Central SYS.
Heat Rejection Equipment & Cooling Tower
Control Principles & Method.
Test Merancang Sistem Tata Udara
Centrifugal REF.Equipment
Absorption REF.Equipment
Reciprocating REF.Equipment
Reciprocating Chiller
Large Packaged Equipment

Instruktur

Ir. Y. Agus Jayatun MT and Team
Ahli di bidang Mechanical & Operation

Peserta

Peserta yang diharapkan berpartisipasi dalam program ini antara lain:

• Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan

Metode

• Presentation, Discussion, Simulation, Case Study, and Evaluation

Time 

• March 13^th – 15^th 2012
• March 20^th – 22^th 2012
• April 03^th – 05^th 2012
• April 18^th – 20^th 2012

Course Fee

• IDR 6.000.000,- / participant (non residential)

• Special rate IDR 5.500.000,- / participant (non residential) for minimum 3 participants from the same company.

Registration should be made 5 days prior to the implementation of training.

Number of attendees must be in accordance with the number of participants registered. If the number of attendees does not match with the number of participants registered, then the company must pay the training cost as much as the number of participants that are registered in the enrollment form that has been sent to us.

*Payment can be made at the time of registration or via bank transfer to acc:

PT Bank Mandiri Cabang KH Ahmad Dahlan Yogyakarta

Acc. No.  137-00-0786993-2

a/n JOGJA TRAINING & CAREER CENTER

For further information Please feel free to contact us

JOGJA TRAINING & CAREER CENTER (JTCC)

Jl. Cendana No 5, Baciro, Yogyakarta

Phone/Fax :  0274 – 419936

Email: pie_buana@yahoo.com

            upie.supriatin@jtcc-consultant.com

Contact Person:  Upie

 Mobile:  0858 8027 8869

The post AC and Refrigation: Safety and Control System appeared first on .